Pembuatan Mesin Internal Mikser Bijih Plastik Kapasitas 50 g/h

Jepriadi Purba, Iswandi Iswandi, Bobby Umroh

Abstract


This research aims to test and validate the performance of the IMBP Machine that has been created, ensuring that the machine can operate effectively and perform its components' functions as expected. Additionally, the objectives of this study include achieving the desired processing results of 50 grams per hour of plastic seeds and systematically developing the process of manufacturing the IMBP Machine, starting from the construction of the iron frame, gear housing, end plate, barrel, hopper, cover, packing, knife shaft, blades, binding shaft, and finishing process. The research methodology employed encompasses field observation, literature review, testing and measurement methods, as well as analytical methods. Field observation is utilized to observe and gather data from machines operating in the field. Literature review is conducted to obtain information related to the theory and practices of the IMBP Machine. Testing and measurement methods are employed to evaluate machine performance and collect data regarding the achieved processing outcomes. Furthermore, the analytical method is used to compare the obtained data with the desired specifications, thus validating whether the machine has achieved the intended targets. The research findings demonstrate that this machine successfully produces the IMBP Machine according to the desired specifications. It is proven to function effectively in processing plastic and carbon materials. With the results of this research, it is expected that this machine can contribute positively to plastic waste processing and carbon waste reduction processes.

Keywords


Internal Mixer Machine; Plastic Granules; Manufacturing; Plastic Material Processing; IMBP Machine Performance.

Full Text:

PDF

References


Alamsyah, D., Zulfikar, A. J., Yusuf, M., & Siahaan, R. (2022). Optimasi kekuatan tekan beton kolom silinder diperkuat selubung komposit laminat jute dengan metode anova compressive strength optimization of cylindrical column concrete reinforced jute laminated composite wrap with anova method. Jcebt, 6(1), 30–36. http://ojs.uma.ac.id/index.php/jcebt

Alibaba. (2023). Industrial Machine Mixer. Alibaba.Com. https://bit.ly/3Xdjaok

Amirhafizan, M., Yuhazri, M., Umarfaruq, H., Lau, S., Kamarul, A., & Zulfikar, A. (2023). Laminated Jute and Glass Fibre Reinforced Composite for Repairing Concrete Through Wrapping Technique. International Journal of Integrated Engineering, 15(1), 1–8.

Cheng, C.-C. (2010). Real-time diagnosis of melting and mixing processes in internal mixer by ultrasound. Journal of Materials Processing Technology, 210(4), 675–683.

Cheremisinoff, N. P. (2001). INTERNAL MIXING PROCEDURES. In Polymer Engineering (pp. 134–151).

Derlini, D., & Zulfikar, A. J. (2022). Penyelidikan Kegagalan pada Alat Pemisah Karet Alam Jenis LRH 410. IRA Jurnal Teknik Mesin Dan Aplikasinya (IRAJTMA), 1(3), 51–61.

Han, D., Zhang, S., Pan, Y., & Wang, C. (2022). Simulation and experimental research on the wear of synchronous quadruple rotor of an internal mixer during the mixing process. Engineering Failure Analysis, 139(1), 106450.

Hidayat, F. A., Khoryanton, A., & Putri, F. T. (2022). RANCANG BANGUN PROTOTIPE MESIN MIXER. 3rd National Conference of Industry, Engineering and Technology, 219–226.

Hidayat, N. (2022). Analisis metode split tensile test komposit laminat jute terhadap kekuatan tarik belah beton kolom silinder. Universitas Medan Area.

Iswandi, Sahari, J., & Sulong, A. B. (2011). Effects of different particles sizes of graphite on the engineering properties of graphites/polypropylene composites on injection molding aplication. Key Engineering Materials, 471–472, 109–114. https://doi.org/10.4028/www.scientific.net/KEM.471-472.109

Iswandi, Sahari, J., Sulong, A. B., & Husaini, T. (2016). Critical Powder Loading and Rheological Properties of Polypropylene/Graphite Composite Feedstock for Bipolar Plate Application. Malaysian Journal of Analytical Sciences, 20(3), 687–696. https://doi.org/10.17576/mjas-2016-2003-30

Iswandi, Sulong, A. B., & Husaini, T. (2019). Effects of Graphite/Polypropylene on the Electrical Conductivity of Manufactured Bipolar Plate. Malaysian Journal of Analytical Sciences, 23(2), 1–7.

Kumar, R., Kumar, M., Kumar, I., & Srivastava, D. (2021). A review on utilization of plastic waste materials in bricks manufacturing process. Materials Today: Proceedings, 6775–6780.

Ma’arif, D., & Kardiman. (2022). PROSES PRODUKSI PENGOLAHAN PLASTIK POLYETHLENE DI PT. PLASTIK KARAWANG FLEXINDO. Jurnal Ilmiah Teknik Mesin, 2(1), 1–11.

Marinho, V. A. D., Cesario, L. V., Costa, A. R. M., Carvalho, L. H., Almeida, T. G., & Canedo, E. L. (2019). Heat transfer coefficient in internal mixers for different polymers and processing conditions. Chemical Engineering Research and Design, 152(1), 466–473.

Mohd Radzuan, N. A., Sulong, A. B., & Iswandi. (2021). Effect of multi-sized graphite filler on the mechanical properties and electrical conductivity. Sains Malaysiana, 50(7), 2025–2034. https://doi.org/10.17576/jsm-2021-5007-17

Rasyid, M. A., Zulfikar, A. J., & Iswandi, I. (2022). Analisis Kekuatan Tarik Komposit Laminat Jute Berdasarkan Pola Kerusakan Kolom Silinder Metode Split Tensile Test Analysis. IRA Jurnal Teknik Mesin Dan Aplikasinya (IRAJTMA), 1(2), 27–34.

Siregar, D. A., Zulfikar, A. J., Siahaan, M. Y. R., & Siregar, R. A. (2022). Analisis Kekuatan Tekan Selubung Komposit Laminat E-glass pada Beton Kolom Silinder dengan Metode Vacuum Bagging. Jurnal Rekayasa Material, Manufaktur Dan Energi, 5(1), 20–25.

Wypych, G. (2012). PLASTICIZERS IN VARIOUS PROCESSING METHODS. In Handbook of Plasticizers (pp. 521–562).

Yuhazri, M. Y., Zulfikar, A. J., & Ginting, A. (2020). Fiber Reinforced Polymer Composite as a Strengthening of Concrete Structures : A Review. Materials Science and Engineering, 13. https://doi.org/10.1088/1757-899X/1003/1/012135

Zulfikar, A. J. (2020). The Flexural Strength of Artificial Laminate Composite Boards made from Banana Stems. Budapest International Research in Exact Sciences (BirEx) Journal, 2(3), 334–340.

Zulfikar, A. J., Siahaan, M. Y. R., Irwan, A., Nasution, F. A. K., & Ritonga, D. A. A. (2022). Analisis Kekuatan Mekanik Pipa Air dari Bahan Komposit Serbuk Kulit Kerang. Jurnal Rekayasa Material, Manufaktur Dan Energi, 5(2), 83–93.

Zulfikar, A. J., Siahaan, M. Y. R., & Syahputra, R. B. (2021). Analisis Signifikansi Roda Skateboard Berbahan Komposit Serbuk Batang Pisang Terhadap Perfoma Kecepatan Dengan Metode Anova. Jurnal Rekayasa Material, Manufaktur Dan Energi, 4(2), 83–90.

Zuo, Z., Chen, X., Gong, S., & Xie, G. (2021). Numerical study of the mixing process of binary-density particles in a bladed mixer. Advanced Powder Technology, 32(5), 1502–1520.




DOI: https://doi.org/10.31289/jitmi.v2i1.1952

Refbacks

  • There are currently no refbacks.