Rancang Bangun Sistem Automatic Keamanan Jarak Pada Truk Trailer Menggunakan Sensor Jarak Berbasis Internet Of Things

Aditya Ryan Abdillah, M. Fadlan Siregar, Habib Satria, Moranain Mungkin

Abstract


One of the causes of accidents that occur on the road is a condition where there is an error in the human factor which lacks focus in observing the circumstances around the vehicle being driven. For drivers of large vehicles such as trucks, they have areas where sight cannot reach or what is commonly called a blind spot, which is due to the large dimensions so that the viewing angle is limited. This situation results in the risk of large vehicles hitting other drivers or other objects that are in the blind spot area. This study aims to design a tool to assist drivers in providing information and warnings if there is an object in the blind spot area. This tool uses an ultrasonic sensor as an object detector, as well as an information system that is sent via wifi and displayed on the Blynk application to determine the distance and location of objects. Testing is carried out by applying it directly to the vehicle to determine the performance of the tool on the vehicle


Keywords


Blind spot, Truck, Ultrasonic Sensor

Full Text:

PDF

References


D. banJarnahor, M. Mungkin, and M. Fadlan Siregar, “Rancang Bangun Alat Monitoring Penyiraman Tanaman Otomatis dengan Node Mcu Berbasis Internet of Things (IoT),” J. Ilm. Tek. Inform. dan Elektro, vol. 1, no. 1, pp. 36–47, 2022, doi: 10.31289/jitek.v1i1.1216.

P. Sistem, I. Manajemen, S. Utara, and N. S. Province, “Perancangan Sistem Informasi Manajemen North Sumatra Province,” vol. 2, no. 1, pp. 28–47, 2023, doi: 10.31289/jitek.v2i1.1896.

Riandra, Lubis, and Khairani, “Analisis Perbandingan Metode SMART Dan MFEP Dalam Menentukan Driver Bus Terunggul Pada PT . Putra Pelangi Perkasa Comparisonal Analysis Of SMART And MFEP Methods In Determining The Best Bus Driver at,” J. Ilm. Tek. Inform. dan Elektro, vol. 1, no. 2, pp. 66–75, 2022, doi: 10.31289/jitek.v1i2.1471.

B. Jaka Valendio and Z. Sembiring, “Prototype Design Of Automatic Cat Feeder Based On Aged With Sms Gateway,” J. Ilm. Tek. Inform. dan Elektro, vol. 1, no. 2, pp. 57–65, 2022, doi: 10.31289/jitek.v1i2.1469.

D. Siahaan, Marwan, and Mahliza, “Analisis Kinerja Jaringan Jalan (Studi Kasus : Jln. S Parman Medan),” J. Ilm. Tek. Sipil dan Arsit., vol. 1, no. 1, pp. 25–36, 2022, doi: 10.31289/jitas.v1i1.1210.

A. H. T. P. Jual-Beli, “Analisis Hukum Pidana Terhadap Penanggulangan Kejahatan Illegal Logging Di Provinsi Riau (Studi Kasus di Pengadilan Negeri Pekanbaru),” ARBITER J. Ilm. Magister Huk., vol. 4, no. 1, pp. 45–57, 2022.

T. Lemke, “An Indigestible Meal? Foucault,Governmentality and State Theory,” Gov. Stud. Educ., pp. 35–54, 2019, doi: 10.1163/9789087909857_004.

M. Danesi, “Understanding Nonverbal Communication,” Underst. Nonverbal Commun., 2022, doi: 10.5040/9781350152670.

K. M. Galvin, D. O. Braithwaite, P. Schrodt, and C. L. Bylund, Family Communication Theories. 2018. doi: 10.4324/9781315228846-3.

D. Neep, “Foucault, governmentality, and critique - by Thomas Lemke,” Polit. Stud. Rev., vol. 12, no. 2, pp. 260–261, 2014.

E. Perdamaian Telaumbanua, D. Ramdan, and M. Mungkin, “Rancang Bangun Sistem Peringatan Tingkat Kelembaban Tanah dalam Pot Tanaman Indoor Berbasis Arduino Uno Design and Construction of Soil Moisture Level Warning System in Indoor Plants Based on Arduino Uno,” J. Ilm. Tek. Inform. dan Elektro, vol. 1, no. 1, pp. 1–13, 2022, doi: 10.31289/jitek.v1i1.1213.

A. A. Nur Syam, Y. Sukmono, and T. A. Pawitra, “Analisis Risiko Keselamatan dan Kesehatan Kerja dalam Proses Produksi Lemari dengan Metode Hazop pada UKM Rumahkayu Samarinda,” J. Ind. Manuf. Eng., vol. 6, no. 2, pp. 122–130, 2022, doi: 10.31289/jime.v6i2.7200.

R. Febritasari, T. A. Achmad Yusuf. Sutrisno, and A. D. . Korawan, “Analisa Pengaruh Panjang Muffler Pada Mesin 4 Tak Berkapasitas 125cc Terhadap Karakteristik Daya dan Torsi Mesin Menggunakan Pengujian dyno dan Komputasi Fluida Dinamis,” J. Mech. Eng. Manuf. Mater. Energy, vol. 7, no. 1, pp. 1–23, 2023, doi: 10.31289/jmemme.v7i1.7687.

P. M. R. Simanullang, M. Mungkin, and H. Satria, “Rancangan Sistem Otomatis Pada Alat Pembuat Pelet Ikan Berbantu Teknologi Arduino Uno Automatic System Design for Fish Pellet Making Tools Assisted by Arduino Uno Technology,” vol. 2, no. 2, pp. 74–80, 2023, doi: 10.31289/jitek.v2i2.2892.

D. Ramdan and S. Muthia Putri, “Jurnal Ilmiah Teknik Informatika dan Elektro (JITEK) Rancang Bangun Prototype Monitoring Ketidakseimbangan Beban Pada Transformator Distribusi Berbasis Internet Of Things Design and Build Prototype Load Unbalance Monitoring Distribution Transformer Based ,” J. Ilm. Tek. Inform. dan Elektro, vol. 1, no. 1, pp. 24–35, 2022, doi: 10.31289/jitek.v1i1.1215.

V. R. Siburian, “Rancang Bangun Pengontrolan Eksitasi Generator Menggunakan Remote Control.,” vol. 1, no. 1, pp. 14–23, 2022, doi: 10.31289/jitek.v1i1.1214.

R. Neugebauer, S. Hippmann, M. Leis, and M. Landherr, “Industrie 4.0 - From the Perspective of Applied Research,” in Procedia CIRP, Elsevier, 2016, pp. 2–7. doi: 10.1016/j.procir.2016.11.002.

R. Panggabean, S. Mardiana, and A. Adam, “Efektifitas Pelayanan Pemeriksaan Fisik Barang Impor Dengan Penerapan Sistem Single Submission (Ssm) Kepabeanan Dan Karantina Melalui Joint Inspection Pada Kantor Pengawasan Dan Pelayanan Bea Dan Cukai Tipe Madya Pabean Belawan Sumatera Utara,” J. Educ. Hum. Soc. Sci., vol. 5, no. 4, pp. 3330–3340, 2023, doi: 10.34007/jehss.v5i4.1705.

I. S. Terate, D. Kartika, R. Kuncoro, and D. S. Gunawan, “Perancangan Sistem Pengukuran Kinerja Minimarket Alfamidi Cabang Suryanata Kota Samarinda Design Of Alfamidi Minimarket Performance Measurement System Of Suryanata Branch Samarinda,” JIME (Journal Ind. Manuf. Eng., vol. 4, no. 2, pp. 2549–6336, 2020, [Online]. Available: http://ojs.uma.ac.id/index.php/jime

A. M. Sembiring, M. Mungkin, and H. Satria, “Rancang Bangun Sistem Otomatis Pemberi Pakan Ikan Berbasis Outseal PLC Automatic System Design Based Fish Feed Outseal PLC,” J. Ilm. Tek. Inform. dan Elektro ( JITEK ), vol. 2, no. 1, pp. 48–56, 2023, doi: 10.31289/jitek.v2i1.1938.

J. Ilmiah, T. Informatika, M. G. Ramadhan, D. Ramdan, and H. Satria, “Rancang Bangun Alat Pendeteksi Suhu Tubuh Menggunakan Nodemcu Berbasis Web Design and Build a Body Temperature Detector Using Web Based Nodemcu,” vol. 1, no. 2, pp. 76–83, 2022, doi: 10.31289/jitek.v1i2.1472.




DOI: https://doi.org/10.31289/jitek.v3i1.3814

Refbacks

  • There are currently no refbacks.