Analisis Rancangan Trainer Kombinasi PV Tipe Polycrystalline dan Monocrystalline pada EBT

Youstra Sebayang, Habib Satria, Fadhillah Azmi

Abstract


Trainer is a medium object similar to real objects that facilitates learning. Solar energy is renewable energy.Each type of PV has its own advantages and disadvantages. In this regard, the design of a solar panel trainer, a combination of pollycrystalline and monocrystalline PV type in NRE, aims to be a learning medium for New
and Renewable Energy (EBT). Solar panels of polycrystalline and monocrystalline types have different characteristics, performance, and efficiency. To get the results of the data so that it can be analyzed, the trainer is designed using a DC Wattmeter, Solar Charge Controller, and Battery. The experiment was conducted on July 17, 2022 and in this trainer can be seen the average efficiency on polycrystalline solar panels of 12.01%, monocrystalline solar panels of 6.11%, and parallel polycrystalline and monocrystalline
solar panels of 4.20%.

Keywords


Trainer, Solar Panel,Polycrystalline, Monocrystlalline,NRE

Full Text:

PDF

References


I. Hermawan, M. Idris, D. Darianto, and M. Y. R. Siahaan, “Kinerja Mesin Motor 4 Langkah dengan Bahan Bakar Campuran Bioetanol dan Pertamax,” J. Mech. Eng. Manuf. Mater. Energy, vol. 5, no. 2, pp. 202–210, 2021, doi: 10.31289/jmemme.v5i2.5787.

Y. Rahmawati, K. L. Fadhilla, and T. M. Kadarina, “JITE ( Journal of Informatics and Telecommunication Engineering ) Analysis of Power Quality in Low Voltage Switch Panels in Real-Time,” vol. 7, no. January, pp. 486–501, 2024.

O. Y. Hutajulu, M. D. Mendoza, D. H. Sinaga, and C. E. Panjaitan, “Android-based Rooftop Solar Power Plant Capacity Calculator Application Development,” J. Informatics Telecommun. Eng., vol. 6, no. 2, pp. 473–483, 2023, doi: 10.31289/jite.v6i2.8343.

C. A. Siregar, M. A. Siregar, and S. Lubis, “Effect of Glass Distance on The Efficiency of Sea Water Distillation Tools That Utilize Solar Energy in The City of Medan,” J. Mech. Eng. Manuf. Mater. Energy, vol. 2, no. 2, pp. 51–55, 2018, [Online]. Available: http://ojs.uma.ac.id/index.php/jmemme

Zainal and R. B. Sidabutar, “Pengaruh Perencanaan Strategis Sumber Daya Manusia Terhadap Kepuasan Kerja Karyawan pada PT. Hari Ayu Perkasa,” JIME (Journal Ind. Manuf. Eng., vol. 4, no. November, pp. 114–124, 2020, [Online]. Available: http://ojs.uma.ac.id/index.php/jime/article/view/4331

Riduan Syahri and Desi Puspita, “Application Of The Backpropagation Method For Digital Image Feature Extraction On Coffee Fruit Classification,” J. Informatics Telecommun. Eng., vol. 6, no. 2, pp. 494–505, 2023, doi: 10.31289/jite.v6i2.8374.

D. F. Ramdani and A. Febriasari, “Model Kebijakan Pengembangan Energi Baru dan Terbarukan di Provinsi Banten,” J. Adm. Publik ( Public Adm. J. ), vol. 8, no. 2, p. 192, 2018, doi: 10.31289/jap.v8i2.1900.

Y. D. Polewangi, H. Andrian, M. Banjarnahor, S. Munte, and N. Siregar, “Penggunaan Metode American Productivity Center (APC) Untuk Pengukuran Produktivitas Pada UMKM XYZ,” J. Ind. Manuf. Eng., vol. 7, no. 1, pp. 1–11, 2023, doi: 10.31289/jime.v7i1.8252.

S. Gunawan, Supriadi, H. Susilo, and F. Sinurat, “Analisa Perbandingan Kinerja Boiler Tanpa dan Dengan Menggunakan Glasswoll sebagai Isolator,” J. Mech. Eng. Manuf. Mater. Energy, vol. 6, no. 2, pp. 208–215, 2022, doi: 10.31289/jmemme.v6i2.7396.

H. Ibrahim, A. Nasution, I. Hermawan, and M. I. Hutasuhut, “Analisa Dampak Penurunan Kinerja Lube Oil Cooler Pada Turbin di PLTU Belawan,” J. Mech. Eng. Manuf. Mater. Energy, vol. 4, no. 1, pp. 10–23, 2020, doi: 10.31289/jmemme.v4i1.3282.

H. Ibrahim, Darianto, and D. D. Cahya, “Unjuk Kerja Sistem Pembangkit Listrik Menggunakan Biogas Limbah Cair Pada Pabrik Kelapa Sawit Performance of the Power Plant System Using Biogas Liquid Waste at the Palm Oil Mill,” Jmemme, vol. 2, no. 2, pp. 78–85, 2018.

R. Tampubolon, I. Hermawan, and M. Idris, “Jurnal Ilmiah Teknik Mesin dan Industri (JITMI) Efficiency of Acrylic Undershot Water Wheel Turbine with 8 Blades and 15° Angle,” J. Ilm. Tek. Inform. dan Elektro, vol. 2, no. 1, pp. 51–60, 2023, doi: 10.31289/jitmi.v2i1.2015.

F. Gea, R. A. Siregar, and M. Y. R. Siahaan, “Pembuatan Alat Uji Tarik Universal Statis Dengan Penggerak Servomotor Berkapasitas Maksimum 1 kN,” J. Mech. Eng. Manuf. Mater. Energy, vol. 6, no. 2, pp. 216–226, 2022, doi: 10.31289/jmemme.v6i2.6173.

Y. H. T. Nasution, R. Singh, and N. Siregar, “Pengendalian Kualitas Produksi Panel Drum Dengan Menggunakan Metode Peta Kontrol Di PT. Atmindo,” J. Ind. Manuf. Eng., vol. 2, no. 1, p. 18, 2019, doi: 10.31289/jime.v2i1.2426.

N. A. Silviana, N. Siregar, and M. Banjarnahor, “Pengukuran dan Pemetaan Tingkat Kebisingan pada Area Produksi,” J. Ind. Manuf. Eng., vol. 5, no. 2, pp. 161–166, 2021, doi: 10.31289/jime.v5i2.6101.

A. C. Limbong, “Penggunaan Metode Balanced Scorecard (BSC) untuk Pengukuran Kinerja pada UMKM XYZ,” J. Ind. Manuf. Eng., vol. 7, no. 2, pp. 217–223, 2023, doi: 10.31289/jime.v7i2.10026.

G. R. Sugihrahma, “Pengaruh Arus Pengelasan Shield Metal Arc Welding dengan Elektroda E7018 pada Baja Karbon Rendah Effect of Welding Current of Shield Metal Arc Welding with E7018 Electrodes on Low Carbon Steel,” vol. 4, no. 2, pp. 197–207, 2020, doi: 10.31289/jmemme.v4i2.4091.




DOI: https://doi.org/10.31289/jitek.v3i1.2263

Refbacks

  • There are currently no refbacks.