Desain Beton High Early Strength (HES) dengan Campuran Superplasticizer

Riki Fendria, Irwan Irwan, Ahmad Sumantri

Abstract


High initial strength concrete technology is increasingly developing to meet modern projects requiring fast-hardening concrete. This research highlights the role of superplasticizers in achieving high initial strengths. Superplasticizers, and chemical additives, reduce water, accelerate hardening, and simplify concrete work. The compressive strength test method on cylindrical specimens was carried out at the age of 3, 7, and 28 days. Using 250 ml of superplasticizer per sack of cement, with water reduced by 40%, can achieve the quality of concrete f'c 25 MPa at 28 days old. The results showed that concrete with superplasticizer had higher initial compressive strength, increasing by 31.49% in 3 days, and 18.84% in 7 days compared to normal concrete. However, at 28 days old, compressive strength tends to be the same as normal concrete.

Keywords


high early strength concrete, superplasticizer, workability, compressive strength

Full Text:

PDF

References


S. dkk Beong, “Peran Badan Penanggulangan Bencana Daerah Kota Medan dalam Penanggulangan Bencana Alam,” JPPUMA J. Ilmu Pemerintah. dan Sos. Polit. UMA (Journal Gov. Polit. Soc. UMA), vol. 4, no. 2, pp. 176–185, 2018.

A. Sinaga and Zainnudin, “Persepsi dan Implementasi Kebijakan Teknologi Informasi Dan Komunikasi Sebagai Sarana Pembelajaran dan Pengaruhnya Terhadap Peningkatan Kualitas Pendidikan Pada SMA Negeri Kota Pematang Siantar,” J. Adm. Publik ( Public Adm. J. ), vol. 3, no. 1, pp. 17–44, 2013, [Online]. Available: http://ojs.uma.ac.id/index.php/adminpublik/article/view/192/145

A. Irwan, “Analisa Respon Mekanik Genteng Dari Bahan Beton Busa Diperkuat Serat Tkks Akibat Beban Impak Hujan Es Dengan Menggunakan Impactor Batang Aluminium,” J. Mech. Eng. Manuf. Mater. Energy, vol. 3, no. 1, p. 57, 2019, doi: 10.31289/jmemme.v3i1.2498.

M. Al Rasid and A. J. Zulfikar, “Analysis Tensile Strength of Laminate Jute Composites Based on Damage Patterns of Cylinder Columns Split Tensile Test Method,” J. Ilm. Tek. Sipil dan Arsit., vol. 1, no. 2, pp. 97–103, 2022, doi: 10.31289/jitas.v1i2.1454.

A. Kekuatan et al., “Analysis of Compressive Strength of Concrete Cylindrical Column,” vol. 6, no. 1, pp. 37–44, 2022.

P. Penggunaan et al., “(Journal of Civil Engineering, Building and Transportation),” vol. 4, no. 1, pp. 1–10, 2020.

A. Perbandingan, K. Tekan, B. Normal, and K. Seunagan, “Analisa Perbandingan Kuat Tekan Beton Normal Dengan Campuran Abu Boiler Pada Proyek Jembatan Di PT. Socfindo Kebun Seunagan,” vol. 7, no. 1, 2023.

S. Sta and M. T. Road, “Analysis Calculation of Carryng Capacity Pile Foundation Overpass Sei,” vol. 3, no. 1, pp. 40–48, 2019, doi: 10.31289/jcebt.v3i1.2460.

E. Perencanaan et al., “(Journal of Civil Engineering, Building and Transportation),” vol. 2, no. 1, 2018.

S. Sugiyanto, M. K. Yunanto, and D. Yulianto, “Inovasi Pengembangan Wisata Kampung Nelayan di Kecamatan Ende Selatan, Kabupaten Endeurahan Tetandara, Rukun Lima, dan Paupanda, Kecamatan Ende Selatan, Kabupaten Ende,” Perspektif, vol. 9, no. 1, pp. 27–37, 2020, doi: 10.31289/perspektif.v9i1.2996.

P. Merbau, M. K. Pembangunan, P. Pasaribu, D. H. P. Simanjuntak, and W. Malau, “ANTHROPOS : Jurnal Antropologi Sosial dan Budaya Metode Intervensi Sosial dalam Penguatan Strategi Masyarakat,” vol. 2, no. 2, pp. 192–205, 2016.

K. Mustafa, P. Studi, T. Industri, and U. M. Area, “JIME ( Journal of Industrial and Manufacture Engineering ) Provinsi Sumatera Utara di Medan Work Network Analysis Using CPM Method on Construction Project of BPK RI Balai Diklat Building Representative of North Sumatra Province in Medan Program Studi Tekn,” vol. 2, no. November 2018, pp. 51–56, 2019.

D. Menggunakan, N. Bow, S. Dan, H. Pasar, D. C. Krisnawan, and H. R. Agustapraja, “Bow , Sni , And Market Prices,” vol. 4, no. September, pp. 80–84, 2020.

T. D. Stevanni Imelda Christianingrum, “IMPLEMENTASI PROGRAM KOTA TANPA KUMUH DI KECAMATAN SEMARANG TIMUR,” J. Public Policy Manag. Rev., vol. 8, pp. 1–19, 2019.

M. S. Siagian, D. Ramdan, and B. Umroh, “Rancang Bangun Cetakan Botol Ukuran 30 ml Model Blow Pada Mesin Injection Molding Design of 30 ml Blow Model Bottle Mold on Injection Molding Machine,” J. Ilm. Tek. Inform. dan Elektro, vol. 2, no. 1, pp. 11–20, 2022, doi: 10.31289/jitmi.v2i1.2009.

N. Fitriadi and Y. Yus, “Pengaruh Penambahan Water Tube Dan Penggunaan Air Panas Hasil Penyulingan pada Boiler Terhadap Lama Waktu Penyulingan Minyak Pala,” J. Mech. Eng. Manuf. Mater. Energy, vol. 3, no. 2, p. 123, 2019, doi: 10.31289/jmemme.v3i2.3096.

Z. Fynnisa, M. Irwansyah, and P. Handayani, “for Cement in Concrete K-300,” vol. 6, no. 1, pp. 92–96, 2022.

P. S. Zalukhu and D. M. Hutauruk, “Effect of Addition of Coco Fiber ( Cocofiber ) to Concrete Mixture as Sound Damper,” vol. 1, no. 1, pp. 27–36, 2017.

C. T. Material, “Concrete Tile Material,” vol. 1, no. 1, pp. 11–18, 2017.




DOI: https://doi.org/10.31289/jitas.v3i1.3875

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Jurnal Ilmiah Teknik Sipil dan Arsitektur (JITAS)