Analisa Pengendalian Proyek Menggunakan Metode Nilai Hasil pada Pembangunan Kantor PT. Waruna
Abstract
This study uses the method of value results (Earned Value). This study aims to determine or predict how much the cost of a project at the time of implementation and to determine the effectiveness of project control and to determine the efficiency of resource users in the form of Cost Performance Index (CPI) and Schedule Performance Index (SPI) as well as total project cost forecasts (EAC). To analyze project control, there are three parameters or indicators, namely BCWS (Budgeted Cost of Work Schedule), BCWP (Budgeted Cost of Work Performed), ACWP (Actual Cost of Work Performed). Delays and deviations can be identified by looking at the Cost Variant (CV) and Schedule Variant (SV). In the calculation of the concept, the value of the SV = -6.197.845.000 value (-) indicates that the work is running slower than the planned schedule, while the CV value = -232.750 value (-) indicates the work costs more than the budget provided. By calculating the estimated total project cost (EAC) of Rp. 15,755.722,795 while the RAB value is Rp. 15,345,000,000. this means that at the end of the project it is estimated that there will be a cost overrun of Rp.410.722.792 (2.67% of RAB).
Keywords
Full Text:
PDFReferences
B. Umarella, “analisis anggaran sebagai upaya dalam perencanaan dan pengendalian biaya proyek pada pt X di kota ambon,” J. Ekon. Sos. Hum., vol. 1, no. 02, pp. 70–75, 2019.
Sahrial, Irwan, and Suranto, “Analisis Faktor-Faktor yang Mempengaruhi Keterlambatan Proyek Peningkatan Jalan Rel Kereta Api Medan-Binjai,” J. Ilm. Tek. Sipil dan Arsit., vol. 1, no. 1, pp. 13–24, 2022, doi: 10.31289/jitas.v1i1.1209.
Erivianto. W. I, Manajemen Proyek Konstruksi. Yogyakarta: Andi Yogyakarta, 2002.
E. H. Tambunan, H. Sabijono, and R. Lambey, “Pengaruh keputusan investasi dan kebijakan hutang terhadap nilai perusahaan pada perusahaan konstruksi di BEI,” J. EMBA J. Ris. Ekon. Manajemen, Bisnis Dan Akunt., vol. 7, no. 3, 2019.
P. A. Ndruru, M. Ardan, and S. Siregar, “Jurnal Ilmiah Teknik Sipil dan Arsitektur ( JITAS ) Metode Pelaksanaan Pemasangan dan Perhitungan Struktur Tower Crane Pada Proyek Pembangunan Living Plaza Medan Implementation Methods of Installing and Calculation of Tower Crane Structures in Development,” vol. 2, no. 1, pp. 44–53, 2023, doi: 10.31289/jitas.v2i1.1953.
A. I. Permatasari, A. Profita, and S. Gunawan, “Evaluasi Metode Lean Project Management Pada Proyek Pelaksanaan Pembangunan Tangki Premium, ADO, dan RFO di Pertamina RU V Balikpapan (Studi Kasus: PT. Barata Indonesia (Persero),” JIME (Journal Ind. Manuf. Eng., vol. 6, no. 1, p. 2022, 2022, [Online]. Available: http://ojs.uma.ac.id/index.php/jime
Y. E. Afinda and G. Budiono, “Peramalan Jangka Panjang Beban Listrik Sektor Rumah Tangga di Jawa Timur Menggunakan Metode Trend Proyeksi dan Regresi Linier,” El Sains J. Elektro, vol. 2, no. 1, 2020, doi: 10.30996/elsains.v2i1.4012.
R.- Baiduri and T.- Handayani, “Model Pembelajaran Problem Based Learning untuk Meningkatkan Hasil Perkuliahan Antropologi Pendidikan,” Anthr. J. Antropol. Sos. dan Budaya (Journal Soc. Cult. Anthropol., vol. 2, no. 2, p. 166, 2016, doi: 10.24114/antro.v2i2.5301.
A. H. Sigalingging and Warjio, “Partisipasi Masyarakat Dalam Perencanaan Pembangunan (Studi Kasus Pada Kecamatan Sidikalang Kabupaten Dairi),” J. Adm. Publik ( Public Adm. J. ), vol. Volume 2, no. Desember 2014, p. 118, 2014.
R. Susilawaty, T. Eddy, and A. Sahari, “Analisis Yuridis Terhadap Perbuatan Mark-up Oleh Panitia Pengadaan Barang Dan Jasa Dalam Proyek Pemerintah,” J. Educ. Hum. Soc. Sci., vol. 3, no. 1, pp. 91–96, 2020, doi: 10.34007/jehss.v3i1.198.
N. F. Pangestu, A. F. A. Zahra, and S. Sutrisno, “Penerapan Metode Critical Parth Method (CPM) dalam Proyek Pembangunan Jembatan Alun-Alun Kota Kuningan,” J. Ind. Manuf. Eng., vol. 5, no. 2, pp. 100–106, 2021, doi: 10.31289/jime.v5i2.4925.
P. T. Pp and A. Kso, “Jurnal IlmiahTeknik Mesin dan Industri ( JITMI ) Analisis Evaluasi Pelaksanaan Proyek Bendungan Sibiru Biru Evaluation Analysis of the Implementation of the Sibiru Biru Dam Project using the CPM ( Critical Path Method ) Method at,” vol. 2, no. 2, pp. 84–91, 2023, doi: 10.31289/jitmi.v2i2.3418.
Suji et al., “Perhutanan Sosial,” War. Kebijak., 2017.
T. D. Riyanti, W. Tambunan, and Y. Sukmono, “Analisis Human Reliability Assessment (HRA) dengan Metode HEART dan SPAR-H (Studi Kasus PT.X),” J. Ind. Manuf. Eng., vol. 5, no. 1, pp. 41–48, 2021, doi: 10.31289/jime.v5i1.4138.
M. Lathifah, T. Yuniastuti, and I. Adianti, “Perancangan Kembali Pasar Tradisional Mangiran Di Kecamatan Srandakan Bantul Penekanan Pada Konsep Desain Arsitektur Hijau,” J. Arsit. Pendapa, vol. 1, no. 2, pp. 38–46, 2020, doi: 10.37631/pendapa.v1i2.112.
M. Sitompul and A. Lubis, “Analisis Sumber-sumber Pendapatan Asli Daerah sebagai Modal Pembangunan,” JPPUMA J. Ilmu Pemerintah. dan Sos. Polit. UMA (Journal Gov. Polit. Soc. UMA), vol. 1, no. 1, pp. 1–10, 2013.
Y. R. Lumi, R. Budiarto, and K. Kusnanto, “Analisis Kebutuhan dan Strategi Penyediaan Energi Listrik di Provinsi Sulawesi Utara,” J. Penelit. Pendidik. IPA, vol. 8, no. 2, 2022, doi: 10.29303/jppipa.v8i2.1441.
A. Penjadwalan Proyek Pembangunan Jembatan Rel Kereta Api Bukit Putus -Padang Menggunakan Metode CPM Dan PERT, C. Okio Br Ritonga, M. Arfah, A. Lukman, and P. Studi Teknik Industri, “Scheduling Analysis of the Bukit Putus-Padang Railway Bridge Construction Project Using the CPM and PERT Methods,” JIME (Journal Ind. Manuf. Eng., vol. 7, no. 1, pp. 2549–6336, 2023.
DOI: https://doi.org/10.31289/jitas.v3i1.3874
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Jurnal Ilmiah Teknik Sipil dan Arsitektur (JITAS)